Asf Unit Removal - Epson Stylus C41 Service Manual

Stylus C41/42/43/44 series

2.2.2 ASF unit removal

1. Remove the upper housing. (Refer to Section 2.2.1)
2. Take out the three screws.
×
CBP 3 8
3 3 3 3
1 1 1 1
×
CBP 3
Figure 2-6. Removing the ASF unit
3. Pull the ASF unit toward the rear and remove it.
T
When installing the ASF unit, install the spring in the guide, then
install it while supporting it by hand.
Figure 2-7. reassembling the ASF unit
T
When reassembling the ASF unit tighten screws form lower
numbers in Figure2-6.
T
Tightening Torque for screw
- C.B.S 3x6
- C.B.S (P2) 3x6
- C.B.P 3x8
Disassembly and Assembly
×
CBS (P2) 3 6
2 2 2 2
6
: 9+/-1 kgf.cm
: 9+/-1 kgf.cm
: 6+/-1 kgf.cm
A D J U S T M E N T
The Top Margin adjustment is required when the ASF unit is
R E Q U I R E D
replaced.
Disassembly
Revision B
20