Table of Contents
Advertisement
1.8 LOG INSTALLATION
1
5
2
CAUTION:
Logs are fragile. Carefully remove the log packages from the heater and the tags from their packages. Handle
logs gently. Place the logs in the heater by following the steps shown. Replace the glass door and dress guard previously
removed prior to lighting the unit. Be certain the gas logs are properly positioned. Logs #4 and #5 are the same log. See
Service Parts pages for individual assembly photos.
1
LOG #1 (SRV2068-700):
so that the bottom grooves fit over bars and the log is snug against the grate tabs.
2
LOG #2 (SRV2068-701):
against grate tabs on first and second bars.
24
Log Set Assembly: LOGS-ST-CE
4
3
6
Place log #1 behind grate tabs on the second and third grate bars on the left rear corner. Position
Locate log #2 in left front corner of the log grate using bottom grooves for placement. Push log
Heat & Glo • ST-HVBI-AU • 2082-900 Rev. C • 8/06
TABS
1
2
Advertisement
Table of Contents
