Ericsson Dialog 3210 User Manual page 82

Programming and Adjustments
g {
g (
Program
X
g {
g (
Program
g
82
To store the current melody:
Press the flashing line key (Access 1 or Access 2 or Inquiry)
Press
The current melody is stored.
Note: The melody is not activated, see section
deactivate a stored
To delete the current melody:
Press and hold until no notes are displayed
Press the flashing line key (Access 1 or Access 2 or Inquiry)
Press
Activate or deactivate a stored melody
A stored melody has to be activated in melody mode to be heard
when you get an incoming call.
To activate (in melody mode):
Press the key for the requested type of call (Access 1 or
Access 2 or Inquiry)
The corresponding key lamp is switched on:
Access 1 key = Internal calls
Access 2 key = External calls
Inquiry key = Callback calls
Note: If you want to return to an ordinary ringing singnal but
keep the melody stored, just press the key for the requested
type of call again. When key lamp is off the stored melody
is deactivated.
#
Press to exit melody mode
melody" on page 82.
Dialog 3210, 3211 and 3212
"Activate or