Ericsson Dialog 3210 User Manual page 77

g
Program
g
Access 1
0
(
g (
Access 1
g (
Program
X
g
Program
g
Access 1
g (
Program
Dialog 3210, 3211 and 3212
Program on Dialog 3211/3212
You have 6 programmable ringing signals on your telephone. The
different signals can be programmed on access lines, additional
lines and multiple represented lines.
Press
Press the corresponding line key
A digit (0–6) is shown in the display (3212 telephone only).
6
— )
Select the ringing signal you want to use according to the list
below
0 = Silent.
1 = Periodic ringing signal.
2 = Delayed periodic ringing signal.
3 = One muted ringing signal.
4 = One muted delayed ringing signal.
5 = Immediate speech connection with single tone burst controlled
by function key.
6 = Immediate speech connection with single tone burst.
Note: Options 5 and 6 are not available for multiple
represented lines.
Press
Press to finish programming
Press to clear the display during programming
Note: 3212 telephone only.
To verify a ringing signal on Dialog 3212
Note: This function is only available on the 3212 telephone.
Press
Press the corresponding line key
A digit (0–6) is shown in the display.
Press to finish programming
Programming and Adjustments
77