Ericsson Dialog 3210 User Manual page 5

Dialog 3210, 3211 and 3212
4 Diversion (follow-me)
See section "Call
removed or moved to other programmable function key by system
administrator.
5 Programmable function keys
See section "Programming and
6 Programmable function key/Headset key
Normally a programmable function key as described at 5. With
Option unit DBY 410 02 (optional accessory) installed under the
telephone, the key is dedicated to be programmed by the system
administrator as the Headset key. See section
Facilities" on page 51.
7 Transfer
See section "During
8 Triple access line
For handling calls. Access 1 and 2 are available both for incoming
and outgoing calls. Inquiry can only be used for outgoing calls.
9 Volume control
See section "Programming and
10 Mute
a To switch the microphone on or off during a call.
b To switch off the ringing signal in idle state or when ringing.
See sections
Signals" on page 85.
11 Loudspeaker on/off
See section "During
12 Clear
To disconnect calls or exit a function. Can always be pressed
instead of replacing the handset. Also to clear the display in
programming mode (3212 telephone only).
13 Handset
Supplied with hearing aid function as standard.
Please note: The handset may attract and retain small
metal objects in the earcap region.
14 Optional pull-out leaf for easy guide
See inside of the back cover.
15 Mute and Programming
See section "During
"Programming and
Forwarding" on page 25. Function can be
Adjustments" on page 72.
Calls" on page 13.
Adjustments" on page 72.
"During Calls" on page 13 and
Calls" on page 13.
Calls" on page 13 (for Mute) and section
Adjustments" on page 72.
Description
"Other Useful
"Audible
5