Call Log; Telephone Settings; Log In/Out Telephone; Message - Avaya 9630 End User Manual

Call Log

Provides access to lists of your outgoing, answered, or missed calls. When you have one or more missed calls, the Call Log
button lights and the Missed Calls icon and the number of missed calls display on the top line.

Telephone Settings

Allows you to configure various settings to utilize advanced featuers of your telephone.

Log In/Out Telephone

Allows you to log in and out of your telephone, while maintaining your preferences, call information, and options if you share a
telephone with other users. Log out to prevent unauthorized use of your telephone during an absence.

Message

The lighted Message button and a red light on the upper right-hand corner of your telephone indicate when you have messages
waiting. Your messages are an administered function. Contact your system administrator with any questions.

Mute

For turning off (and then back on again) the microphone so the other person on the call cannot hear you. If a call is on mute
and you switch between the handset, headset, or speakerphone, the mute will be turned off. When the Mute button light is on,
the call is muted.

Redial

Permits you to redial a recently dialed number.

Simultaneous Ringing

Allows you to have incoming calls ring on your office telephone and your cell phone at the same time. This allows you to
answer office calls while you are away from your desk. The cell phone number is programmed by your system administrator.
To answer an incoming call:
1. If you are not on another call, lift the handset.
or, Press the line button next to the incoming call.
or, Press Speaker to answer using the speakerphone.
or, Press Headset to answer using the headset.
If you are on another call, from the Phone screen, scroll to the line with the incoming call and press Answer or OK.
or, Press the line button next to the incoming call.
You are connected to the incoming call.
o
Note: To automatically display the Phone screen whenever you receive an incoming call, set the Go to Phone Screen on
Ringing option to Yes.
Note: If the Auto Hold feature is enabled by your system administrator, you can answer another call without first putting an
active call on hold. If Auto Hold is not enabled, you must put your active call on hold before answering the incoming call;
otherwise, you will drop the active call when you answer the other one.
To send an incoming call directly to voicemail:
1. Press To Vmail.
The incoming call goes directly to voicemail.
o
Note: If your telephone does not display a To Vmail softkey, your administrator has not made this feature available.
To ignore an incoming call:
1. Press Ignore.
The ringer is turned off for the currently incoming call.
o
Answer a Call
9630 IP Telephone End User Guide | 6 | P a g e