Cut Mode - Brady BMP 21-PLUS User Manual

26
Menus

Cut Mode

Cut Mode
Set the Cut Mode default to determine when the printer should pause for cutting. There are two
modes to choose from:
In a multiprint job (serialized label, terminal block, breaker box, etc.) cut mode determines if
the printer should pause between each label for cutting the individual labels. If you select Cut
at End of Job, all labels in a serialized sequence, or all labels for each listed block in a terminal
or breaker box label type, will print out as one long string, pausing for cutting only after the
last label has been printed.
To set the Cut Mode:
1.
2.
3.
®
BMP 21-PLUS/BMP
• Cut Between Labels
• Cut at End of Job
Press MENU
Navigate to Cut Mode, then press Enter
Navigate to the desired cut mode, then press Enter
®
21-LAB User's Manual
.
.
.