Epson TM-L90 series Service Manual page 98

Confidential
These methods can be selected by DIP switch 1.
Table 7-4 Setting of DIP switch 1
Method
Power ON/OFF using the power switch
Power ON/OFF with the power switch disabled
The explanations below show how to power the unit ON or OFF by each method.
Power ON/OFF method using the power switch
Power ON:
Power OFF:
Power ON/OFF method with disabling the power switch
Power ON:
Power OFF:
Rev.B
Press the power switch.
Hold down the power switch for more than 3 seconds.
Turn ON the power breaker at the store where the printer is installed,
or turn ON the switch on the power box or wall outlet where the
printer is connected.
1. Execute the power off process using the DLE DC4 (fn=2)
command.
2. Make sure the POWER LED starts flashing.
3. Turn off the power breaker or the switch on the power box or
wall outlet.
TM-L90 Service Manual
DIP switch 1
OFF
ON
Handling 7-5