Switch To Sleep Mode When Not In Use - HTC Touch HD User Manual

To automatically configure data connection settings
1.
When you see the notification message from the
Connection Setup, tap Yes.
Note
If you do not see the notification message, tap
on the Title bar to display the message.
2.
If your SIM card supports multiple network
operator profiles, a message will appear with
network profile choices. Select the profile you
want to use and tap OK.
3. Connection Setup then starts to configure your
device's data connection settings.
4.
After the Connection Setup completes the
configuration, tap Restart.
For more information about Connection Setup, see Chapter 1.

Switch to Sleep mode when not in use

Briefly press the POWER button to turn off the display temporarily and switch your
device to Sleep mode. Sleep mode suspends your device to a low power state
while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time. You will still be able to receive messages and calls
while your device is in Sleep mode. Pressing the POWER button again or incoming
calls will wake up your device.
Getting Started