Starting Up; Turn Your Device On And Off; Switch To Sleep Mode When Not In Use - HTC Touch Pro User Manual

4 Getting Started

1.5 Starting Up

After installing your SIM card and battery and charging the battery, you can now
power on and start using your device.

Turn your device on and off

To turn on the power
1.
Press the POWER button.
2.
When you turn on your device for the first time, a Quick Start Wizard guides
you through the calibration process and the setup of date and time, and
password. For more information about these settings, see Chapter 1. After
the Quick Start Wizard finishes, the device installs customisation settings,
then restarts.
Note
After the device restarts, you may be prompted to set up an email account. For
instructions on how to set up an email account, see Chapter .
To turn off the power
1.
Press and hold the POWER button for a few seconds.
2. Tap Yes when a message prompts you to choose whether or not to turn off
the device completely.

Switch to Sleep mode when not in use

Press and immediately release the POWER button to turn off the display temporarily
and switch your device to Sleep mode. Sleep mode suspends your device to a low
power state while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time. You will still be able to receive messages and calls
while your device is in Sleep mode. Pressing the POWER button again, removing
the stylus, or incoming calls/messages will wake up your device.