Table of Contents
Advertisement
Auto configure the data connection settings
The first time you power on your device, you will
see a notification message from Connection
Setup. Connection Setup automatically configures
your device's data connections, such as GPRS, WAP,
and MMS, so that you do not need to enter the
settings manually for your device.
To automatically configure data connection
settings
1.
When you see the notification message from
the Connection Setup, tap Yes.
Note
If you do not see the notification message, tap the title bar to display the System
Status screen and then tap
2.
If your SIM card supports multiple network operator profiles, a message will
appear with network profile choices. Select the profile you want to use and
tap OK.
3.
Connection Setup then starts to configure your device's data connection
settings.
4.
After the Connection Setup completes the configuration, tap Restart.
For more information about Connection Setup, see Chapter 1.
Switch to Sleep mode when not in use
Press and immediately release the POWER button to turn off the display temporarily
and switch your device to Sleep mode. Sleep mode suspends your device to a low
power state while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time. You will still be able to receive messages and calls
while your device is in Sleep mode. Pressing the POWER button again or incoming
calls/messages will wake up your device.
to display the message.
Getting Started 5
Advertisement
Table of Contents
