Switch To Sleep Mode When Not In Use; Navigating On Your Device; Finger-Touch Control - HTC touch cruise User Manual

6 Getting Started
2.
If your SIM card supports multiple network operator profiles, a message will
appear with network profile choices. Select the profile you want to use and
tap OK.
3. Connection Setup then starts to configure your device's data connection
settings.
4. After the Connection Setup completes the configuration, tap Restart.
For more information about Connection Setup, see Chapter 1.

Switch to Sleep mode when not in use

Press and immediately release the POWER button to turn off the display temporarily
and switch your device to Sleep mode. Sleep mode suspends your device to a low
power state while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time. You will still be able to receive messages and calls
while your device is in Sleep mode. Pressing the POWER button again will wake up
your device.

1.7 Navigating On Your Device

There are different ways you can navigate and interact with the interface of your
device.

Finger-touch control

A quick and easy way to interact with the home screen and the whole interface
of your device is by touch. Basically, the following are the types of actions, called
finger gestures, you would use when interacting with your device: