Table of Contents
Advertisement
11.4 Using FM Radio
FM Radio allows you to listen to FM radio stations on your device. Since FM Radio
uses the provided stereo wired headset as an antenna, you must plug in the
headset first onto the earphone jack of your device before you open the program.
To open FM Radio
Tap Start > Programs > FM Radio.
The first time this program is used, it will automatically scan for available FM
channels in your area, save them as presets, then play the first FM station found. For
information about saving favorite stations as presets, see "Save presets."
When you tap
background and allows you to continue listening to the radio while you use other
programs. To turn off the FM radio, tap
Radio screen.
FM Radio controls
10
9
8
7
on the FM Radio screen, the program continues to run in the
1
1
Turns off FM radio.
2
2
See "Radio display" for details.
3
Searches the FM band for the next higher FM channel.
4
Increases the radio frequency by 0.1MHz.
5
Turns the sound on or off.
3
6
Save up to six favorite FM stations as presets.
4
Tap a button to tune in to a favorite station.
7
Switches between headset and speaker output.
5
8
Switches between Mono and Stereo modes.
9
Decreases the radio frequency by 0.1MHz.
6
10 Searches the FM band for the next lower FM channel.
Experiencing Multimedia 1
on the upper right corner of the FM
Function
Hide quick links:
Advertisement
Table of Contents
