Scene Setup Options - Honeywell Tuxedo User Manual

Scene Rules
• Triggers and Conditions include: Time setting, Security mode, Thermostat setting, Door status and Zones.
• Actions include: Security mode, Lights on/off, Thermostat settings, and Door Lock status.
• Each Trigger event can have up to 3 Actions.
• A Trigger event and Condition cannot be the same (i.e., if setting a Trigger event for SECURITY, you cannot set a SECURITY
Condition).
• A total of 10 Scenes can be created.
Note: Determine if you need a Condition. The Condition is a 'pre-condition' set to occur prior to a trigger event. See example
below.
Example: Turn the lights on, when the system is disarmed, only at night.
(Condition) ... "only at Night"
(Trigger) ......when the "system is Disarmed" ...Set the Trigger to SECURITY: System Disarm.
(Action) ... Turn the "lights ON" ...

Scene Setup Options

Options for adding a Condition (if needed) – After each selection press SAVE!!!
In the "Condition" box, press the Add icon.
To set the time, press the TIME button: "Set the occurrence" to Repeated, or Once. If "Repeated" was selected, choose the desired days of the
week; if ONCE was selected Enter Date. The Time can be set to edeute automatically at Sunrise or Sunset by pressing the Sunrise/Sunset
option. Note: The Sunrise/Sunset feature is dependent on the "Region" selected in the "Weather Forecast" section and requires internet access
for accuracy. Press the BY CLOCK button (to limit the scene to execute only from within a specified time window) and press on the
"hour/minutes" displayed, to enter the desired time on the data entry keyboard. Press on AM/PM to change the setting.
To set the security mode, press the SECURITY button and select: DISARM, AWAY (triggers upon arming away), STAY, NIGHT, AWAY SECURED
(triggers when exit delay has expired) and ALARM.
To set the thermostat settings, press the THERMOSTAT button and select a Thermostat Device from the drop down menu. Use the ABOVE
and BELOW buttons to increase/decrease the temperature or press the Temperature Value box and enter 2 digits for the desired temperature.
Note: Test thermostats first to ensure proper function in the Scene feature.
To set the door lock status, press the DOOR button and select a Door Device from the drop-down menu (see notes below). Select LOCKED or
UNLOCKED.
To set the zones, press the Zones button and select a zone from the drop-down menu. Select Restore, Alarm or Fault.
Note: Do not use zone Restore option in the Condition field.
Automation (cont'd)
...Set the TIME condition (enter the Start Time and End Time).
... Set the Action to LIGHT: ON.
38