Create A Group - Honeywell Tuxedo User Manual

Options for adding a Trigger – After each selection press SAVE!!!
In the "Trigger" box, press the Add icon.
To set the time, press the TIME button and "Set the occurrence" to Repeated, or Once. If "Repeated" was selected, choose the desired days of the
week; If ONCE was selected, Enter Date. The Time can be set to edeute automatically at Sunrise or Sunset by pressing the Sunrise/Sunset option.
Note: The Sunrise/Sunset feature is dependent on the "Region" selected in the "Weather Forecast" section and requires internet access for accuracy.
Press the BY CLOCK button (to limit the scene to execute only from within a specified time window) and press on the "hour/minutes" displayed, to
enter the desired time on the data entry keyboard. Press on AM/PM to change the setting.
To set a security mode, press the SECURITY button and select: DISARM, AWAY (triggers upon arming away), STAY, NIGHT (for residential
panels only), AWAY SECURED (triggers when exit delay has expired) or ALARM.
To set the thermostat settings, press the THERMOSTAT button to select the Thermostat Devices from the drop down menu. Use the ABOVE
and BELOW button to increase/decrease the temperature range or press the Temperature Value box and enter 2 digits for the desired
temperature. Note: Test thermostats first to ensure proper function in the "Scene" feature.
To set the door lock status, press the DOOR button to select a Door Device from the drop-down menu (see notes below). Select LOCKED,
UNLOCKED or CODE UNLOCKED.
To set the zones, press the Zones button and select a zone from the drop-down menu. Select Restore, Alarm or Fault.
Note: Do not use zone Restore in the Condition field.
Options for adding an Action – After each selection press SAVE!!!
In the "Action" box, press the Add icon.
To set the security mode, press the SECURITY button and select: DISARM, AWAY, STAY, NIGHT. Enter User Code, if required.
To set the light on/off, press the LIGHT button and select a Light Device from the drop down menu; set the action to ON / OFF.
To set the thermostat settings, press the THERMOSTAT button and select a Thermostat from the drop-down menu. Press the Set Mode button
to set the Action to "Off", "Heat", or "Cool". Press the Set Energy button and select from "Normal" or "Saving" energy mode. Press the Set
Point button to enter a set point value for "Heat Point" and "Cool Point". Note: Test thermostats first to ensure proper function in the Scene
feature.
To set the door lock status, press the DOOR button and select a Door Device from the drop-down menu (see notes below). Set the action to
LOCKS or UNLOCKS
Notes:
1. Motorized door lock bolts physically lock and unlock when activated, but if the door lock installed is a non-motorized type,
activation allows the door to be manually unlocked without a
2. Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
3. When using a Kwikset Smartcode electronic deadbolt door lock (in a Scene that is programmed to trigger when unlocked) the
Scene does not trigger if using a key; enter a user code.

Create a Group

The Group Setup feature enables multiple devices to function as a group. Follow the procedure below to create a Group.
ICON
1. Press the Automation icon and then press the
Group Setup icon.
2. Press the Add icon and enter a Group Name
on the "Data Entry" keyboard.
Automation (cont'd)
ACTION
key. See "Compatible Devices" section for further information.
NOTES
Group names (i.e., All, etc.) are displayed across the top to the screen.
Use the Data Entry Keyboard to enter all required information.
• Press the Up Arrow key to switch to capital letters
• Press the X key to delete
39