Release K.11.67; Release K.11.68 - HP ProCurve 3500yl Release Notes

Software Fixes in Release K.11.12 - K.13.49

Release K.11.67

Web/RADIUS (PR_1000368520) — Web Authentication doesn't authenticate clients due
■
to a failure to send RADIUS requests to the configured server.
■ WebUI (PR_1000371598) — Unable to Access Stack Members through Commander
WebUI. Use of the WebUI "stack access" drop-down list on the stacking commander returns
a "Page not found" error.
Release K.11.67
The following problems were resolved in release K.11.67 (not a general release)
■ MSTP (PR_1000385573) — MSTP instability when root switch priority is changed. This
causes other switches with better priority to assert themselves as root, thus causing a root
war to occur.

Release K.11.68

Software never released.
CLI/LLDP (PR_1000377191) — Output from the CLI command, "show lldp info
■
remote-device <port>" shows a blank field for the chassis ID.
■ Crash (PR_1000390591) — Software exception at sflow.c:3903 after re-starting sflow
sampling. Switch may crash with a message similar to:
Software exception at sflow.c:3903 -- in 'mSnmpEvt',
task ID = 0x8248e90-> ASSERT: failed
DHCP (PR_1000386886) — DHCP-relay uses an inconsistent address when the VLAN is
■
multinetted. This fix forces the lowest IP address to be used for DHCP.
■ Enhancement (PR_1000388709) — SFlow does not accommodate bursty traffic.
■ ROM update (PR_1000390486) — ROM update to version K.11.03, required to support
the upcoming K.12 software update.
■ Trunking (PR_1000238829) — Trunks numbered trk10 and greater cause the output from
the CLI command "show span" output to be misaligned.
159