Show Module Enhancement - HP ProCurve 3500yl Release Notes

For example, if the host "Labswitch" is in the domain abc.com, you can enter the following command
and the destination is resolved to "Labswitch.abc.com".
ProCurve(config)# telnet Labswitch
You can also enter the full domain name in the command:
ProCurve(config)# telnet Labswitch.abc.com
You can use the show telnet command to display the resolved IP address.
ProCurve(config)# show telnet
Telnet Activity
--------------------------------------------------------
Session : ** 1
Privilege: Manager
From : Console
To :
-------------------------------------------------------
Session : ** 2
Privilege: Manager
From : 12.13.14.10
To : 15.33.66.20
-------------------------------------------------------
Session : ** 3
Privilege: Operator
From : 2001:db7:5:0:203:4ff:fe0a:251
To : 2001:db7:5:0:203:4ff1:fddd:12
Figure 16. Example of show telnet Command Displaying Resolved IP Addresses
Enhancement (PR_ 0000000089) — The CLI show modules command displays additional
■
component information for system support modules and mini-GBICS.

Show Module Enhancement

Overview
With this enhancement, the CLI show modules command will display additional component informa-
tion for the following:
• System Support Modules (SSM) — identification, including serial number
• Mini-GBICS — a list of installed mini-GBICs displaying the type, "J" number, and serial
number (when available)
Enhancements
Release K.13.04 Enhancements
90