Saving Configurations While Using The Cli - HP ProCurve 3500yl Release Notes

Saving Configurations While Using the CLI

The switch operates with two configuration files:
■ Running-Config File: Exists in volatile memory and controls switch operation. Rebooting
the switch erases the current running-config file and replaces it with an exact copy of the
current startup-config file. To save a configuration change, you must save the running
configuration to the startup-config file.
■ Startup-Config File: Exists in flash (non-volatile) memory and preserves the most
recently-saved configuration as the "permanent" configuration. When the switch reboots for
any reason, an exact copy of the current startup-config file becomes the new running-config
file in volatile memory.
When you use the CLI to make a configuration change, the switch places the change in the
running-config file. If you want to preserve the change across reboots, you must save the change to
the startup-config file. Otherwise, the next time the switch reboots, the change will be lost. There are
two ways to save configuration changes while using the CLI:
Execute write memory from the Manager, Global, or Context configuration level.
■
When exiting from the CLI to the Main Menu, press [Y] (for Yes) when you see the "save
■
configuration" prompt:
Do you want to save current configuration [y/n]?
Software Management
Saving Configurations While Using the CLI
6