HP ProCurve 3500yl Release Notes page 121

Creates a shortcut alias name to use in place of a commonly used command. The
alias command is executed from the current config context.
name: Specifies the new command name to use to simplify keystrokes and aid
memory.
command: Specifies an existing command to be aliased. The command must be
enclosed in quotes.
Use the no form of the command to remove the alias.
For example, if you use the show interface custom command to specify the output, you can configure
an alias for the command to simplify execution.
ProCurve(config)# show int custom 1-4 port name:4 type vlan intrusion speed
enabled mdi
Status and Counters - Custom Port Status
Port Name
---- ---------- ---------- ----- --------- ------- ------- --------
1 Acco
2 Huma
3 Deve
4 Lab1
ProCurve(config)# alias showintstatus "show int custom 1-4 port name:4 type
vlan intrusion speed enabled mdi"
ProCurve(config)#
ProCurve(config)# showintstatus
Status and Counters - Custom Port Status
Port Name
---- ---------- ---------- ----- --------- ------- ------- --------
1 Acco
2 Huma
3 Deve
4 Lab1
Figure 26. Example of Using the Alias Command with show int custom
Intrusion
Type VLAN Alert
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
Intrusion
Type VLAN Alert
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
Release K.13.19 Enhancements
Speed Enabled MDI-mode
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
Speed Enabled MDI-mode
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
Enhancements
110