Table of Contents
Advertisement
Advanced Settings
Click on "System Config" for advanced setting.
SYSTEM CONFIG
ACCOUNT
ALARM
NOTE :
Apply--
After changing all setting, press "apply" to
refresh the data.
Reboot--
Press this button to restart setting.
Set up the user's account (Max 10 accounts),
password and authority (Max 5 accounts on line
at the same time).
1. User's level:
SUPERVISOR- controls all the functions
HIGH LEVEL-controls advanced functions
NORMAL -controls basic functions only
GUEST LEVEL - watch the image only
2. Life time: During this period of time,
users are allowed to control the Video
Web Server.
Set up the ALARM function. You can use it to operate
the "alarm trigger recording" function.
1. Alarm Trigger: Enable or disable Alarm trigger
2. Alarm Method : Two selections—E-mail or FTP.
3. Image Resolution : Image storing resolution for
4. Alarm refresh : Clear the alarm messag
* When the motion detection is triggered, the DVR
will send the alarm image to notify the users.
37
function.
Email or FTP function(CIF is
176 *144; D1 is 352*288)
e "
which is showed on
the screen.
"
Advertisement
Table of Contents
