Setting Time And Date For The First Time; Installing Living Eco - Danfoss Living Eco Installation And User Manual

Installation Guide

1.7 Setting time and date for the first time

1.
When the batteries are installed the time
flashes on the display - 23:59.
a. Set hours with
b. Set minutes with
c. Set date with
1.8 Installing living eco®
1.
Screw living eco® onto the adapter and tighten
by hand (max. 5 Nm).
While slightly pressing forward, turn living
eco® clockwise untill it locks, then tighten.
3.
A large M is flashing in the display to indicate
that Installation Mode is activated.
8
09/2013
living eco® Electronic Radiator Thermostat
, press
to confirm.
, press
to confirm.
, press
to confirm.
2.
When flashes, press
settings.
The display now switches to the Home Screen
(see chapter 3.1).
2.
Activate Installation Mode to fix living eco®
correctly onto the valve: Press
seconds to select the Function Menu.
Select M with
4.
Press to fix living eco®.
VIIDB222
to confirm your
for 3
. When M flashes, press
Danfoss Heating Solutions
.