Setting Time And Date For The First Time; Installing Eco - Danfoss Eco Installation Manual

Installation Guide

1.7 Setting time and date for the first time

1.
When the batteries are installed the time
flashes on the display - 23:59.
a. Set hours with
b. Set minutes with
c. Set date with

1.8 Installing eco

1.
Note! Activate Installation Mode
Ensure you are in Installation Mode before you
mount eco. If not, press
3.
Screw eco onto the adapter and tighten by
hand (max. 5 Nm).
While slightly pressing forward, turn eco
clockwise untill it locks, then tighten.
8
06/2015
, press
to confirm.
, press
to confirm.
, press
to confirm.
for 4 seconds.
eco Intelligent Radiator Thermostat
2.
When flashes, press
settings.
The display now switches to the Installation
Mode a large M flashes on the screen.
2.
A large M is flashing in the display to indicate
that Installation Mode is activated.
4.
Press for 4 seconds to fix eco.
VIJPD102
to confirm your
Danfoss Heating Solutions