Setting The Heating Control; Open-Window Function - Danfoss Living Eco Installation And User Manual

User Guide

5.5 Setting the Heating Control

1.
If the display is off, press
again and hold for 3 seconds.
3.
1 flashes, indicating moderate heating re-
sponse is selected (recommended for district
heating). Use to shift to 0, press
confirm.

5.6 Open-window function

living eco® features an Open-window function, which
closes the valve if the room temperature is falling
dramatically, thus reducing the heat loss.
The heat is turned off for up to 30 minutes, before living
eco® returns to its original settings.
When Open-window has been activated, the function is
quarantined for 45 minutes.
Note! Be aware that the Open-window function will be
affected, if curtains or furniture is covering living eco®, thus
preventing it from detecting the decreasing temperature.
Danfoss Heating Solutions
living eco® Electronic Radiator Thermostat
, then press
flashes.
to
VIIDB222
2.
Press both buttons for 3 seconds, use
to select Hc and press
4.
0 flashes, indicating quick heating response is
selected (recommended for all boilers), press
to confirm.
to confirm.
09/2013
25