Before You Start; Choice Of 24Hr Or Am/Pm Display; Setting The Date And Time - Danfoss FP715Si User Manual

Electronic 2-channel full programmer for heating & hot water with service interval timer

Hide thumbs Also See for FP715Si:

Table of Contents

1.3 Before you start

Open the ﬂ ap on the front of the clock. Press the RESET button using

a non-metallic object (e.g. pencil/matchstick) until you hear a click

and the 2 red lights on the front of the unit ﬂ ash once.

This will stop and restart the electronics,

without losing the factory set time and

date settings.

To fully reset the unit see page 19.

Press and hold DAY/HOL and NEXT ON/

OFF for 1.5 seconds to toggle between

24hr clock and AM/PM display, as

required.

These

settings

manufacture and only need to be

changed in the unlikely event that the

unit has lost the settings.

Setting the Date

Press and hold PROG for 5 seconds to

display year.

Use the + or - buttons to set the correct

year.

Danfoss Heating

are

made

during

DAY/HOL

Table of Contents

Show Quick Links

Table of Contents