Empire Comfort Systems VFLL38FP30L-1 Installation Instructions And Owner's Manual page 29

TRANSMITTER (REMOTE CONTROL WITH LCD DISpLAY)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display (Figure 38).
The Transmitter is powered by 3 AAA type batteries. A Mode Key
is provided to Index between the features and a Thermostat Key is
used to turn on/off or index through thermostat functions (Figures
38 and 39).
Figure 38 - Proflame Transmitter
Transmission
Thermostat
OFF/ON/SMART
Set Point
Temperature/Level/State
Flame ON
Figure 39 - Transmitter LCD display
29516-10-0713
pROFLAME - Ip CONTROL SYSTEM
Blue LCD display
ON/OFF Key
THERMOSTAT Key
UP/DOWN Arr o w Key
MODE Key
Child safety lock-out
Low battery alarm
Temperature
RECEIvER
The Proflame Receiver (Figure 40a and 40b) connects directly to
the gas valve and stepper motor with a wiring harness. The Re-
ceiver is powered by 4 AA type batteries. The Receiver accepts
commands via radio frequency from the Transmitter to operate the
appliance in accordance with the particular Proflame system con-
figuration. The Receiver three position slider switch can be set to
one of three positions: ON (Manual Override), Remote (Remote
control) or Off.
Figure 40a - Proflame Receiver Body Front
Room
Figure 40b - Proflame Receiver Body Back
PRG Key
3 Positions Slider
14 PIN terminal
Page 29