Outside Temperature Indicator - Subaru Tribeca 2014 Owner's Manual

To adjust the time shown by the clock,
press the "+" button or the "−" button. The
indicated time will change in 1-minute
increments. If you keep the button
pressed, the rate at which the indicated
time changes will speed up.
When you keep either the "+" or "−" button
pressed, time change will pause for 1
second at the end of each 30-minute
change. The clock will start going forward
or backward again quickly after this 1-
second pause.
CAUTION
To ensure safety, do not attempt to
set the time during driving, as an
accident could result.
Outside temperature indica-
tor
NOTE
If your vehicle is equipped with a
genuine SUBARU navigation system,
refer to the Owner's Manual supple-
ment for the navigation system.
U.S.-spec. models
Instruments and controls
Except U.S.-spec. models
The outside temperature indicator shows
the outside temperature in a range from
−22 to 1228F (−30 to 508C) when the
ignition switch is in the "ON" position.
The indicator can give a false reading
under any of the following conditions.
. When there is too much sun.
. During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.
– CONTINUED –
3-23