Outside Temperature Indicator - Subaru Impreza 2017 Owner's Manual

3-50
Instruments and controls/Multi–function display (black and white)
1. Press and hold the + button located
on the side of the information display. The
stopped time will then flash.
2. Within 5 seconds after the stopped
time starts flashing, press and hold the −
button located on the side of the informa-
tion display. The display will then change
and after flashing for 2 seconds, the
stopped time selected will be displayed.
3. Each time the − button is pressed
and held during the 3 seconds that the
display is flashing, the display will change
and flash for 2seconds. If the − button is
not pressed and held during the 3 second
period that the display is flashing, the
stopped time selected will be displayed.
! Turn off display of driving informa-
tion display
Select the blank space in the menu to exit
the driving information display selection.
NOTE
. The average fuel consumption and
average vehicle speed are calculated
even while the driving information dis-
play has been turned off.
. Even if you turn off the driving
information display, the display will
automatically turn on when the battery
voltage is disconnected and then re-
connected for battery replacement or
fuse replacement.
& Outside temperature indica-
tor
NOTE
. The outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.
. The temperature unit cannot be
changed.
! Road surface freeze warning indi-
cation
When the outside temperature drops to a
certain temperature or lower, the tempera-
ture indication flashes for 5 seconds to
show that the road surface may be frozen.
If the display is already indicating that the
outside temperature is low when the
ignition switch is turned to the ON
position, the indication does not flash.
NOTE
. The outside temperature indication
may differ from the actual outside
temperature. The road surface freeze
warning indication should be treated
only as a guide. Be sure to check the
condition of the road surface before
driving.