High Beam Indicator Light; Cruise Control Indicator Light; Cruise Control Set Indicator Light; Headlight Indicator Light - Subaru Tribeca 2014 Owner's Manual

3-22
Instruments and controls
High beam indicator
&
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
Cruise control indica-
&
tor light
This light illuminates when the "CRUISE"
main switch is pressed to activate the
cruise control function. For details, refer to
"To set cruise control" F7-30.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates, the cruise control indicator
light flashes at the same time. At
this time, avoid driving at high
speed and have your vehicle in-
spected at a SUBARU dealer as
soon as possible.
NOTE
If you move the cruise control lever or
press the main switch button while
turning the ignition switch "ON", the
cruise control function is deactivated
and the cruise control indicator light
flashes. To reactivate the cruise control
function, turn the ignition switch back
to the "Acc" or "LOCK" position, and
then turn it again to the "ON" position.
Cruise control set in-
&
dicator light
This light illuminates when vehicle speed
has been set to use the cruise control
function.
Headlight indicator
&
light
This indicator light illuminates when the
light switch is turned to the "
(to turn on the parking lights) or to the
" position (to turn on the headlights).
"
Front fog light indicator
&
light
This indicator light illuminates while the
front fog lights are illuminated.

Clock

NOTE
If your vehicle is equipped with a
genuine SUBARU navigation system,
refer to the Owner's Manual supple-
ment for the navigation system.
" position
The clock shows the time while the
ignition switch is in the "Acc" or "ON"
position.