Firebrick Removal And Replacement Inst; Baffle Removal And Replacement Inst - Lopi Liberty Owner's Manual

Firebrick Removal and Replacement Instructions
With the appliance cool, remove all ash from the firebox. Only the firebrick that is damaged must be
replaced. If the damaged firebrick is on the floor, it can be replaced by simply removing the firebrick in
front of it. NOTE: Do not pry firebrick to remove, this will chip or crack the firebrick. If a
firebrick on the wall of the firebox needs replacement, the floor firebrick near it will need to be removed
first. The wall firebrick is held upright by a clip on the walls of the firebox. To remove, pivot it out
from the bottom. See the illustration on the following page.
WALL FIREBRICKS
First remove the firebricks on
the floor in front of the firebrick
needing replacement. Then
pivot it out from the bottom to
clear the clip that holds it in
place.
FLOOR FIREBRICKS
Remove the firebricks in
front of the firebrick
needing replacement.
FIREBRICK SIZES -
All firebrick is 1 1/4" x 4 1/2" x 9"
except those labeled.
Firebrick labeled
1 1/4" x 4 1/2" x 6 3/8".
Firebrick labeled
1 1/4" x 4 1/2" x 8 1/4".
Baffle Removal and Replacement Instructions
The view below details the baffle components. Instructions for removal are on the following page.
Bypass Rod - threaded in two locations for easy removal
Bypass
Damper
Bypass Support - note
its orientation and how
it rests on the rear
baffle firebrick
M
AINTAINING
A
are
B
are
Y A
OUR PPLIANCE
CLIPS -
Hold the wall firebrick in place.
A
Bypass Handle
Baffle supports rest on these tabs
(C )
ONTINUED
B
A
Baffle
Firebrick
Center
Baffle
Support
Forward
Baffle
Support
P 27
AGE