Adjusting The Treble; Adjusting The Balance; Adjusting The Fader - Clarion DXZ728R Owner's Manual

Basic Operations

Adjusting the TREBLE

The treble gain and treble F (center frequency)
can be adjusted as follows.
1. Press the [A] button and select "TREB
<GAIN>".
2. Press the [a] or [d] button and select from
"TREB <GAIN>"
"TREB <GAIN>".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain
and the F (center frequency).
TREB GAIN : –6 to 6 (The factory default
setting is "0")
TREB F : 8KHz/12KHz (The Factory
default setting is "12K")
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.

Adjusting the balance

1. Press the [A] button and select "BALANCE".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.

Adjusting the fader

1. Press the [A] button and select "FADER".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the Beat EQ
1. Press the [BEQ] button and select the Beat
EQ mode (1 to 3) to adjust.
2. Press the [A] button and select "BASS
BOOST or IMPACT or EXCITE".
14
DXZ728R
"TREB <F 12K>"
3. Turning the [ROTARY] knob clockwise ad-
justs in the + direction; turning it counter-
clockwise adjusts in the – direction.
∗ When BASS BOOST is selected, you can ad-
just the bass in the range of –3 to 3.
∗ When IMPACT and EXCITE is selected, you
can adjust the bass and treble in the range of
–3 to 3.
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass to
create a natural sound tone. When you are lis-
tening to music at a low volume, it is recom-
mended to use the loudness effect.
1. Press and hold the [A] button for 1 second or
longer to turn on the loudness effect. When
the loudness effect is turned on, "LD" lights
in the display.
2. Press and hold the [A] button for 1 second or
longer to turn off the loudness effect. "LD"
goes off in the display.
Note:
• When using a sold separately digital sound pro-
cessor (DPH913), a feature called auto loudness
is selected. This function is different from the
loudness effect. For further details on the auto
loudness feature, refer to the subsection "Output
adjustment of auto loudness, subwoofer and
playback band" in section "DSP Operations".
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the [D]
button to switch to the CT display.
∗ If a CT data is not being received, "CT––:––" ap-
pears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.