Adjusting The Treble; Adjusting The Balance; Adjusting The Fader - Clarion FZ409E Owner's Manual

Basic Operations

Adjusting the treble

This adjustment can be performed only when the
BEAT EQ is set to "CUSTOM".
Select "TREBLE".
3 - 1 .
Touch [ ] key to enter detail setting stage.
3 - 2 .
Touch [ ] / [
3 - 3 .
center frequency ( "F" ) or Q factor ( "Q" ) .
Slide along [
3 - 4 .
key to adjust the value.
∗ The factory default setting:
G : "0" ( Adjustment range: + 7 to - 7 )
F : "10kHz" ( Adjustment range: 5k/10k/15k )
Q : "1.0" ( Adjustment range: 0.7/1.0/1.4/2.0 )
After completing settings, touch the [ ENT ]
3 - 5 .
key to return to the 1
Setting the BBE MP ( Sound
Enhancement and Restoration for
compressed audio files )
BBE MP ( Minimized Polynomial Non-Linear Sat-
uration ) Process improves digitally compressed
sound, such as MP3, by restoring and enhancing
the harmonics lost through compression. BBE
MP works by regenerating harmonics from the
source material, effectively recovering warmth,
detail and nuance.
14
Downloaded from Caradio-Manual.com Manuals
FZ409E
] key to select Gain ( "G" ) ,
] slider or touch [ ] / [
selected item.
st
∗ This function is effective for the audio files in the
USB/iPod mode, but it is ineffective for the video
in the USB/iPod mode.
Select "BBE MP".
3 - 1 .
Touch [ ] key to enter detail setting stage.
3 - 2 .
Slide along [
3 - 3 .
key to select the value in sequence of
"OFF" "ON"
∗ The factory default setting is "OFF".
When "ON" is set:
Touch [
3 - 3 - 1 .
stage.
]
Slide along [
3 - 3 - 2 .
key to select the value in sequence of
"HIGH"
∗ The factory default setting is "MID".
After completing settings, touch the [ ENT ]
3 - 4 .
key to return to the 1

Adjusting the balance

Select "BALANCE".
3 - 1 .
Touch [ ] key to enter detail setting stage.
3 - 2 .
Slide along [
3 - 3 .
key to adjust the balance of the right and left
speakers.
∗ The factory default setting is "CENTER".
( Adjustment range: RIGHT 12 to LEFT 12 )
After completing settings, touch the [ ENT ]
3 - 4 .
key to return to the 1

Adjusting the fader

Select "FADER".
3 - 1 .
Touch [ ] key to enter detail setting stage.
3 - 2 .
Slide along [
3 - 3 .
key to adjust the balance of the rear and front
speakers.
∗ The factory default setting is "CENTER".
( Adjustment range: FRONT 12 to REAR 12 )
After completing settings, touch the [ ENT ]
3 - 4 .
key to return to the 1
] slider or touch [
] key to enter detail setting
] slider or touch [ ] / [ ]
"MID" "LOW"
selected item.
st
] slider or touch [
selected item.
st
] slider or touch [
selected item.
st
] / [ ]
] / [ ]
] / [ ]