Clarion DXZ728R Owner's Manual page 18

Operations Common to Each Mode
Setting the method for Ttitle scroll
Set how to scroll in CD-TEXT or MD.
∗ The factory default setting is "ON".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
"AUTO SCROLL".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select "ON" or "OF".
ON:
To scroll automatically.
OF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is "SENS MID".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
"AUX SENS".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
"SENS HIGH", "SENS MID" or "SENS LOW".
4. Press the [T] button to return to the previous
mode.
22
DXZ728R
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
∗ The factory default setting is "OF".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
"BLINK LED".
3. Turn the [ROTARY] knob clockwise to set this
function "ON" or turn it counterclockwise to
switch this function "OF".
4. Press the [T] button to return to the previous
mode.
Selecting AUX/TEL
You can listen to sounds and music from exter-
nal devices or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is "AUX".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
"AUX/TEL".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
"AUX" or "TEL".
AUX :
AUX/TEL input cable is for external Audio input.
TEL :
AUX/TEL input cable is for cellular phone au-
dio input.
4. Press the [T] button to return to the previous
mode.
Setting the car speaker output for
the cellular phone
∗ The factory default setting is "RIGHT".
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select "TEL-
SP".