Clarion DXZ728R Owner's Manual page 9

Setting the Beat EQ
This unit are provided with 5 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗ The factory default setting is "USER CUSTOM".
Each time you press the [BEQ] button, the tone
effect changes in the following order:
"BASS BOOST" "IMPACT"
"USER CUSTOM" "TONE BYPASS"
"BASS BOOST" ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble empha-
sized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect
Adjusting the tone
Press the [A] button and select the item to ad-
just. Each time you press the [A] button, the
item changes in the following order:
When "BASS BOOST" is set
"BASS BOOST" "BALANCE"
Last function mode.
When "IMPACT" is set
"IMPACT" "BALANCE"
Last function mode.
When "EXCITE" is set
"EXCITE" "BALANCE"
Last function mode.
When "USER CUSTOM" is set
"BASS <GAIN>" "MID <GAIN>"
"TREB<GAIN>" "BALANCE"
Last function mode.
When "TONE BYPASS" is set
"BALANCE" "FADER"
mode.
∗ Pressing the [BEQ] button for 1 second or longer
while in "USER CUSTOM" sets flat, and displays a
"BEQ FLAT" message.
Note:
• When the separately-sold digital sound processor
(DPH913) is used, the bass and treble tone ad-
justments cannot be made. To adjust the tone, re-
fer to the section "DSP Operations".
Adjusting the bass
The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
1. Press the [A] button and select "BASS
2. Press the [a] or [d] button and select from
3. Turn the [ROTARY] knob clockwise or coun-
"EXCITE"
4. When the adjustment is complete, press the
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
1. Press the [A] button and select "MID <GAIN>".
2. Press the [a] or [d] button and select from
"FADER"
3. Turn the [ROTARY] knob clockwise or coun-
"FADER"
"FADER"
"FADER"
4. When the adfustment is complete, press the
Last function
Basic Operations
<GAIN>".
"BASS <GAIN>" "BASS <F 50>"
"BASS <Q 1>" "BASS <GAIN>".
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is "0")
BASS F : 50Hz/80Hz/120Hz (The
factory default setting is "50")
BASS Q : 1/1.25/1.5/2 (The factory
default setting is "1")
[A] button several times until the function
mode is reached.
"MID <GAIN>" "MID <F 1k>"
<Q 2>" "MID <GAIN>".
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
MID GAIN : –6 to 6 (The factory default
setting is "0")
MID F : 700Hz/1KHz/2KHz (The factory
default setting is "1k")
MID Q : 1.5/2 (The factory default
setting is "2")
[A] button several times until the function
mode is reached.
"MID
13
DXZ728R