Table of Contents
Advertisement
Basic Operations
Once selected, the preferred display becomes
the display default. When a function adjustment
such as volume is made, the screen will
momentarily switch to that function's display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
When you have entered a title in a CD, it ap-
pears in the sub display. If you have not en-
tered a title, "NO-TTL" appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection "Entering titles"
in the "Other Handy Functions".
You can adjust the way of scrolling a title. For
the details on it, refer to the subsection
"Adjusting the way of scrolling" in the "Other
Handy Functions".
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
The factory default setting is "OFF".
Each time you press Z-EHCR button 2, the tone
effect changes in the following order:
"Z-EHCR 1"
"Z-EHCR 2"
"OFF"
"Z-EHCR 1"...
• Z-EHCR 1 : bass emphasized
• Z-EHCR 2 : treble emphasized
• Z-EHCR 3 : bass and treble emphasized
• OFF
: no sound effect
Adjusting the tone
Press A-M button ( and select the item to ad-
just. Each time you press A-M button (, the item
changes in the following order:
When the Z-enhancer is off
"BASS"
"TREB"
Function mode...
When Z-enhancer 1, 2 or 3 is set
"Z-EHCR"
"BAL"
mode...
Adjusting the bass
1. Press A-M button ( and select "BASS".
2. Press Up button & to emphasize the bass,
or press Down button * to attenuate the bass.
The factory default setting is "0". (Adjustment
range: 6 to +6)
3. When the adjustment is complete, press A-M
button ( several times until the function mode
is reached.
10
ADX5655z
"Z-EHCR 3"
"BAL"
"FAD"
"FAD"
Function
Adjusting the treble
1. Press A-M button ( and select "TREB".
2. Press Up button & to emphasize the treble,
or press Down button * to attenuate the
treble.
The factory default setting is "0". (Adjustment
range: 6 to +6)
3. When the adjustment is complete, press A-M
button ( several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button ( and select "BAL".
2. Press Up button & to emphasize the sound
from the right speaker, or press Down button
* to emphasizes the sound from the left
speaker.
The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button ( several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button ( and select "FAD".
2. Press Up button & to emphasize the sound
from the front speakers, or press Down but-
ton * to emphasize the sound from the rear
speakers.
The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button ( several times until the function mode
is reached.
Adjusting the Z-enhancer
1. Press Z-EHCR button 2 and select the Z-
enhancer mode (1 to 3) to adjust.
2. Press A-M button ( and select "Z-EHCR".
3. Press Up button & or press Down button *
to adjusts Z-enhancer.
When Z-enhancer 1 is selected, you can adjust
the bass in the range of ±2.
When Z-enhancer 2 is selected, you can adjust
the treble in the range of ±2.
When Z-enhancer 3 is selected, you can adjust
the bass and treble in the range of ±2.
4. When the adjustment is complete, press A-M
button ( several times until the function mode
is reached.
Advertisement
Table of Contents
