Product Introduction; Product Overview; Package Contents - NetComm NTC-6000 Series User Manual

Product introduction

Product overview

An NTC-6000 series router allows you to build wide area networks utilizing the superior speeds supported by 3G UMTS networks.
Employing an embedded 3G UMTS modem module the router offers downlink speeds of up to 7.2Mbps and uplink speeds of up to
5.76Mbps.
The NTC-6000 series provides you with a point-to-point or point-to-multi-point communications link in a single, compact and
resilient unit. As a fully featured cellular router, it supports a large number of communication interfaces and protocols to meet the
demands of today's telemetry and WAN applications.
Designed with remote installation in mind the NTC-6000 series supports multi-level system monitoring giving you peace of mind the
device will keep the lines of communication up and open.
In the event of system corruption, a built-in recovery mode provides the facility to re-install the system software to the router and
resume normal operations quickly. The recovery mode is described in more detail in an appendix to this guide.

Package contents

The NetComm Wireless NTC-6000 Series router package consists of:
1x NTC-6000 Series router
2x 3G antennas
1x 1.5m yellow Ethernet cable 8P8C
1x quick start guide
If any of these items are missing or damaged, please contact NetComm Wireless Support immediately. The NetComm Wireless
Support website can be found at: http://support.netcommwireless.com.
www.netcommwireless.com NetComm Wireless 3G M2M Router
RouterRouter/
5