Adjusting Sliding Fit Between Trunnion And Bevel Bracket - Delta Sidekick 36-235 Instruction Manual

B
C
A
D
Fig. 36
ADJUSTING SLIDING FIT BETWEEN
TRUNNION AND BEVEL B R A C K E T
A fter a long period of time it may become necessary to
adjust the sliding fit between the trunnion (A) Fig. 36, and
the bevel bracket (B) by tightening adjusting nut (C)
using a 3/4 socket wrench.
NOTE: This adjustment must be made with the bevel
lock handle (D) loose.
Correct adjustment is when a good snug sliding fit is
o b tained between these two pa r ts . This adjustment should
n o t b e t o o t i g h t t h a t i t r e s t r i c ts the tilting movement of the
trunnion (A) when bevel cutting, or too loose that it aff e c ts
the accuracy of the saw cut.
19