Cap Strength FM-H1007A125 Owner's Manual page 15

Step 25:
Align the same cable underneath another pulley wheel (61) and
attach it and pulley guide sleeves to the teeth extending upwards
from the base frame (3). Secure into place with bolt (36), washer
(47), and locknut (43).
Step 26:
Align the same cable above another pulley wheel (61). Secure the
pulley wheel (61) and pulley guide sleeves (62) between the pulley
panels (27) with bolt (36), washers (47), and locknut (43). Attach
snap hooks (69) to either end of the short chain (67). Attach the
chain to the bottom cable (64) Then open snap hooks and attach
the assembly to the tab welded to the base frame.
Step 27:
To lock the home gym in "safe position" insert the P pull pin (73) through the loop in the safety wire (79) and push
into the lowest hole of the selector shaft (12). This will keep the stack from moving, and will need to be removed
before the next exercise period.
WARNING:
Make sure the lock out mechanism for the weight stack is secured after each use of the machine to prevent the
inadvertent use by children.
15