Cap Strength FM-H1007A125 Owner's Manual page 13

Step 17:
Using another pulley wheel (61) place the pec deck cable (65)
within the grooves and then attach pulley bracket B (26) and
pulley guide sleeves (x2) to the wheel and secure by using
bolt (36), washers (47) and locknut (43).
Step 18:
Using the same pec deck cable (65), bring it back and fit it
around another pulley wheel (61). Align the pulley wheel (61)
between the teeth of the pulley bracket C (28). Align right
safeguard cover (30) with the pulley wheel (61) and pulley
bracket C (28) and secure by using bolt (36), washers (47)
and locknut (43).
Step 19:
Align the top cable (63) with another pulley wheel (61). Then
attach the pulley to the top frame (5) with bolt (34), washers
(47), top hat bushings (71), pulley guide sleeve (62) and locknut
(43). Attach snap hooks (69) to either end of the long chain (66).
Then open snap hooks and attach the lat bar (13) to chain.
Attach assembly to the ball end of the top cable (63).
(Note: top cable has a screw connected at one end and a ball
on the other end.)
Step 20:
Pull the top cable (63) and align it with the top of the pulley
wheel (61). Insert the pulley into the space at the top frame (5)
and then attach the pulley to the top frame (5) with bolt (34),
washers (47), top hat bushings (71), pulley guide sleeve (62)
and locknut (43).
13