Cap Strength FM-H1007A125 Owner's Manual page 11

Step 9:
Attach the top frame (5) making sure that it is aligned
correctly to the guide rods (10) and to top frame main
support (2). Then secure using bolts (34&38), washers (47),
enforcement (25) and locknuts (43).
Step 10:
Install the L type screw (75) into the bracket on the arm
of the top main frame support (2) using bolt (36), washers (47)
and locknut (43). Next, install the inner washers #12.5 (50)
into the holes on the top frame (5). Connect the press arm
junction (16) to the top frame (5) using bolt (31), washers (46)
and locknut (42).
Step 11:
Slide the foam arm rests (22) onto both arms (14&15) then
attach press/fly handles (19) to arms using bolt (33) and
curved washers (51). Connect both assembled arms (14&15)
to the press arm junction (16) using inner washers #16.5 (49),
washers (45&46), and locknut (42).
Step 12:
Attach the back cushion (23) by using bolts (39) and washers (48).
11