Oki C831n User Manual page 36

Connecting to a Computer
10
Click [Network].
1
The device search starts.
- If the printer is detected, the software is
automatically installed. Proceed to step
12.
- If the printer is not detected, the
[Installation settings] screen is
displayed. Proceed to step 11.
11
Click [Restart search] to restart the
device search.
After the printer is displayed, select the printer
and click [Next].
Memo
● If the printer is not displayed by clicking [Restart
search], select [IP address] and enter the IP
address assigned to your printer, and then click
[Next].
12
If the [Windows Security] dialog box
appears, click [Install this driver
software anyway].
13
Click [Exit] to complete the installation.
Note
● If the dialog box prompting to restart the computer
appears, click [Yes]. The computer automatically
restarts.
Reference
● For how to configure the tray settings by the driver,
refer to "When Adding Options"
14
Click [Start] > [Devices and Printers].
15
Check that the [OKI C831] icon is
displayed.
Right-click the
of the menu items, and then check that all the
printer drivers installed are displayed in the
submenu.
16
Remove the "Software DVD-ROM" from
the computer.
‰ Finish by test printing from a computer.
1
Open a printer driver property.
2
Click Test Print.
The installation is complete.
‰ If installing the options such as an
additional tray unit or the SD memory
card kit, specify the settings with a printer
driver. Refer to
P.56.
- 36 -
P.56.
[ ]
OKI C831 icon and select one
"When Adding Options"