6
Cover the image drums you took out
with paper so that the image drums do
not expose to the light.
7
Turn the blue locks (5) on each side of
the belt unit in direction of the arrow to
unlock.
5
8
Remove the belt unit by holding the blue
lever (6).
6
9
Hold the handle of a new belt unit with
one hand and support lower part with
other hand. Place the belt unit into the
printer.
5
10
Turn the blue locks (5) on each side of
the belt unit in direction of the arrow.
- 123 -
Replacing Consumables and Maintenance Units
➋
➌
➍
5
➊
4
5