Preparing Your Printer
3
Remove the metal plate (2) by sliding it
1
upward.
(1)
Put your finger in the recess of the
metal plate (2), and slide it upward.
(2)
Pinch the lower part of the metal
plate (2), and pull it forward.
4
Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
5
2
6
2
7
3
- 28 -
Install the SD memory card (4) into the
SD memory card socket (5).
Install the SD memory socket to the
printer with the screw (6) and tab (7) for
the SD memory card socket and attach
the connector (8).
6
Install the metal plate (2).
(1)
First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
➊
4
5
8
7
2
➋