Oki C831n User Manual page 26

Preparing Your Printer
5
Insert the additional RAM (4) into the
1
slot and fix it by pushing it toward the
printer.
Note
● Be sure to check a direction of an additional RAM.
The additional RAM has small dents on its connector,
which are fitted with a connector of a slot.
6
Install the metal plate (2).
(1)
First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
➊
(2)
While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
➋
Note
● Attach the SD memory card socket before installing
the metal plate if the SD memory card socket was
attached to the printer.
4
2
➋
2
➊
7
Close the access cover (1).
8
Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
9
Press the <ENTER> button on the
operator panel.
10
Check that [Configuration] is selected
and press the <ENTER> button.
11
Press the scroll button
to select [System] and press the
<ENTER> button.
- 26 -
1
several times