Oki C831n User Manual page 25

Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
memory overflow or the collate print errors
occur. Your printer supports 256 MB and 512 MB
RAM.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
● The static electricity may damage parts. Discharge the
static electricity from your body by touching grounded
metallic parts, etc., before work.
Memo
● For banner printing, installing additional memory is
recommended.
1
Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
● "Turning Off the Power" P.22
2
Open the access cover (1) on the right
side of a printer.
3
Slide the metal plate (2) upward to
remove.
● If the SD memory card socket is attached, remove
(1)
(2)
4
Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
1
- 25 -
Note
the SD memory card.
Put your finger in the recess of the
metal plate (2), and slide it upward.
Pinch the lower part of the metal
plate (2), and pull it forward.
Preparing Your Printer
1
2
2
3