(2)
While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
➋
8
Close the access cover (1).
9
Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
10
Press the <ENTER> button on the
operator panel.
11
Check that [Configuration] is selected
and press the <ENTER> button.
12
2
➊
13
14
1
● [15 GB] may be displayed in [SD Card]. This is not an
● If the value of [SD Card] has not increased, turn off
15
- 29 -
Press the scroll button
to select [System] and press the
<ENTER> button.
Press the scroll button
to select [SD Card] and press the
<ENTER> button.
Check that the value of [SD Card] is
[16 GB].
Note
error.
your printer and unplug the AC cord and Ethernet or USB
cable, and then reinstall the SD memory card.
Press the <ON LINE> button.
Preparing Your Printer
several times
1
several times