Important Notes About Stag Dmx Operation - Chauvet COLORado 2 User Manual

Important Notes about STAG DMX Operation

MASTER DIMMER
Channels 1 controls the intensity of the currently projected color
When the slider is at the highest position (255), then the intensity of the output is at the
maximum.
RED, GREEN BLUE AND WHITE COLOR SELECTION
Channels 2, 3 4 and 5 control the intensity ratio of each of the Red, Green, Blue,& White
LEDs.
Channels 1, 2 3 and 4 can be combined together to create over 4.2 billion color
combinations.
STROBE
Channel 7 controls the strobe of Channels 1 through 5.
Channel 7 has priority over Channels 2, 3, 4 & 5.
Speed of the strobe is adjustable from 0 to 20 Hz.
COLOR MACROS
Channel 6 selects the required Color Macro.
Channel 6 has priority over Channels 2, 3, 4, 5 & 7.
Channel 1 is used to control the intensity of the current Color Macro.
ID ADDRESS SELECTION
Use channel 11 to select ID addressed fixtures.
Each independent DMX address can have up to 66 ID addressed fixtures.
ID address "0" allows control of all fixtures simultaneously.
AUTO & CUSTOM PROGRAMS
Chanel 8 selects the preset Auto/Custom programs 1~10
When activating the Auto/Custom programs, it is then possible to control the Step time
and Fade time by using Channels 2 & 3 respectively.
Channel 8 has priority over channels 2-7.
DIMMER SPEED
Channel 10 is for selecting the dimmer mode and dimmer speed.
When channel 10 is not activated, then RGBW and Master Dimmer are linear.
The dimmer modes 1, 2, 3, and 4 are different speeds of the nonlinear dimming curves.
COLORado™ 2 User Manual
21
2009-02-18 12:45 PM