Important Notes About Studio 2 Dmx Operation - Chauvet COLORado 1 VW User Manual

Important Notes about Studio 2 DMX Operation

MASTER DIMMER
Channels 1 controls the intensity of the currently projected color
When the slider is at the highest position (255), then the intensity of the output is at the
maximum.
COOL WHITE, WARM WHITE, AND WHITE CT MACRO SELECTION
Channels 2, 3 control the intensity ratio of each of the Cool & Warm White LEDs.
Channels 2 and 3 can be combined together to create multiple white CT color
combinations.
STROBE
Channel 4 controls the strobe of Channels 2 through 4..
Channel 4 has priority over Channels 2, through 4.
Speed of the strobe is adjustable from 0 to 20 Hz.
WHITE CT MACROS
Channel 5 selects the required White CT Macro.
Channel 5 has priority over Channels 2, through 4.
Channel 1 is used to control the intensity of the current White CT Macro.
ID ADDRESS SELECTION
Use channel 6 to select ID addressed fixtures.
Each independent DMX address can have up to 66 ID addressed fixtures.
ID address "0" allows control of all fixtures simultaneously.
COLORado™ 1 VW User Manual
19
2009-03-06 9:53 AM