Mounting; Orientation; Rigging - Chauvet COLORado 2 User Manual

3, 4, 5, or 9-channel dmx-512 led wash light

Hide thumbs Also See for COLORado 2:

Table of Contents

Mounting

This fixture may be mounted in any safe position.

The fixture includes a mounting yoke to which a rigging clamp can be attached. You

must supply your own clamp and make sure the clamp is capable of supporting the

weight of this fixture. It is recommended to use at least 2 mounting points per

fixture. You can order "C" and "O"-clamps from any CHAUVET dealer or distributor

(CLP-15, CLP-06 recommended).

Caution!

Hanging Clamp

Note: sold separately

COLORado™ 2 User Manual

Note: There are 2 types of applications for this fixture: floor stand for up lighting, and

overhead use for down lighting. If you are using this fixture for up lighting, then you must

use at least 1 safety cable/chain for each fixture in addition to the mounting brackets.

If hanging the fixture for over head use, then please follow the below steps.

Block access below the work area and use suitable and stable platform

when installing or servicing fixture.

Safety cables must always be used, secured through safety cable

attachment. The safety cable must be capable of holding 10 times the weight

of the fixture.

Verify the structure can hold 10 times the weight of all to-be installed

fixtures.

After prolonged periods of operation, the fixture chassis may reach high

temperatures. This fixture must be mounted in a ventilated location, as it

is convection cooled.

Safety Cable

Note: the cable must be

secured through the heat

sink ventilation

passageway.

2/18/2009 12:45 PM

Table of Contents