Important Notes About Dmx Mode 1; Mode Selection; Id Address Selection; Module Selection - Chauvet COLORado 3P User Manual

Important Notes about Stage 1 Mode 1
Re d, G r e e n a nd Bl ue Sel e c t i on
· Channels 1, 2 and 3 control overall intensity of each respective color.
· Channels 1, 2 and 3 can be combined to create an unlimited range of colors.
· Channels 1, 2 and 3 have priority over Channels 4, 5, 6 and 7.
Ye l l ow, Cya n, Pur pl e a nd Whi t e
· These colors can not be mixed.
· When levels are raised on more than one of these channels, the lowest channel number
will have priority.
St r obe
· Strobe occurs at every channel with exception to programs on Channel 9 and 12.
· Speed of the strobe is adjustable from 0 to 20 Hz.
M ode Se l e c ti on
· Channel 9 values 5-244 provides mode selection and can only be activated while
Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels
1 through 7 can be any value.
· When Color-Cycle mode 4 is selected channel 11 controls the speed.
I D a ddr e s s s e l e ct i on
· Use channel 10 to select ID addressed fixtures.
· Each independent DMX address can have up to 66 ID addressed fixtures.
· ID address "0" allows control of all fixtures simultaneously.
M odul e s el e c t i on
· Provides individual control of the three LED modules in each fixture.
· Channel 11 has priority over channel 12.
Ef f e c t m a c r o
· These are pre-programmed color patterns and module chases.
· Channel 12 has priority over channels (1, 2, 3, 4, 5, 6 & 7).
· Channel 12 has priority over channel 11 if first activated.
COLORado™ 3 User Manual 21
Operating Instructions
1/30/2012 10:56 AM