Important Notes About Stage 1 Dmx Operation - Chauvet COLORdash Par User Manual

Important Notes about STAGE 1 DMX Operation

MASTER DIMMER
Channels 1 controls the intensity of the currently projected color
When the slider is at the highest position (255), then the intensity of the output is at the
maximum.
RED, GREEN BLUE AND WHITE COLOR SELECTION
Channels 2, 3, and 4 control the intensity ratio of each of the Red, Green, & Blue LEDs.
Channels 2 3 and 4 can be combined together to create over 16 million color combinations.
STROBE
Channel 6 controls the strobe of Channels 2 through 4.
Channel 6 has priority over Channels 2, 3, & 4.
Speed of the strobe is adjustable from 0 to 20 Hz.
COLOR MACROS
Channel 7 selects the required Color Macro.
Channel 7 has priority over Channels 2, 3, 4.
Channel 1 is used to control the intensity of the current Color Macro.
ID ADDRESS SELECTION
Use channel 9 to select the target ID address.
Each independent DMX address can have up to 66 ID addressed fixtures.
ID address "0" allows control of all fixtures simultaneously.
AUTO & CUSTOM PROGRAMS
Chanel 7 selects the preset Auto/Custom programs 1~10
When activating the Auto/Custom programs, it is then possible to control the Step time and
Fade time by using Channels 2 & 3 respectively.
COLORdash™ Par User Manual 20
9/4/2008 12:09 PM